Land-Based Drilling Systems
CS-14 CORING RIG
- Depth capacity
1200 meters (4040 Feet) with NQ string
800 Meters (2690 Feet) with HQ string
475 Meters (1550 Feet) with PQ string - Chuck Assembly
Type: Self-centering five-jaw
Maximum Inside Diameter: 117mm (4 ? in) - Hoisting Capacity
Main: 80 kN (18,000lb) - Standard Equipment
1.22 m (4 ft) Leveling Hydraulic Supports
Foot Clamp:139.7mm (5.5 in)
Trido 140 water pump - Power Unit
Stage II Cummins diesel engine - Feed System
Stroke: 3.5 m (11.5 Feet)
CS-4002 CORING RIG
- Depth Capacity Coring*
N Wireline: 2,450 m (8,030 ft)
N Wireline: Upset Ends 2,850 m (9,350 ft)
H Wireline: 1,600 m (5,250 ft)
P Wireline: 1,050 m (3,440 ft)
*for vertical, straight and water filled hole - Mast and Feed System
Feed Travel: 3.35 m (11 ft)
Feed Speeds: Fast and slow with variable control
Pull Back: 200 kN (45,000 lbf)
Thrust: 89 kN (20,000 lbf)
Rod Pull Length: 6.1 m (20 ft) or 9.1 m (30 ft)
Drilling Angle: 45 To 90 Degrees
Mast Dump: 2 m (80 in) 
Power Unit
Mfg.: Cummins Qsc Pu 8.3 Liter 6 Cylinder
Power: 212 Kw (285 Hp) @ 2,100 rpm
Type: Diesel Turbo Charged/Charge Air Cooled
Cooling: Water- Hydraulic Pumps
Primary Pump: Rotation, Hoist, W/L Hoist, Fast Feed
Auxiliary Pump: Slow Feed, Chuck, Foot Clamp, Mud Mixer
Secondary Pump: Mud Pump - Chuck Assembly
Maximum Inside Diameter: 117 mm (4 5/8 in)
Holding Capacity: 178 kN (40,000 lbf)
Operation: Spring Applied, Hydraulically Opened - Drillhead
Maximum Rpm: 1,300
Maximum Torque: 6,230 nM (4,596 ft lbf)
Transmission: Four Speed, Manual Shift
Mounting: Hydraulic Powered Slide Away
Lubrication: Pressure System - Main Host
Single Line Capacity: 178 kN (40,000 lbf)
Line Speed: 36 – 71 m/min (117 - 232 fpm)
Cable Diameter: 22 mm (7/8 in) - Wire Line Hoist Capacity
2,600 m (8,530 ft) of 6.35 m (1/4 in) cable
4,600 m (15,090 ft) of 4.76 mm (3/16 in) cable
Line Speed: Bare 1.38 m/s (272 fpm) full 5.1 m/s (1004 fpm)
Line Pull: Bare 28.5 kN (6,380 lbf) full 5.1 kN (1,151 lbf) - Standard Equipment
Four Hydraulic Jacks 610 mm (24 in) stroke
Hydraulic P-Size Holding Clamp
Control Panel Hydraulic Slide
High Altitude Kit
Hydraulic Mud Mixer
Fuel Tank 950 l (250 gal)
Mud Pump: Hydraulic Driven FMC W1122bcd
Max Flow: 140 lpm (37 gpm)
Max Pressure: 7.0 mpa (1,000 psi) - Weight
Rig Weight: 13,380 Kg (29,500 lbs)
Truck GVW: 36,287 Kg (80,000 lbs)
Total Weight: 49,667 Kg (109,500 lbs)
The newest addition to our fleet of drilling rigs, the CS4002 is an all-hydraulic diamond core drill for deep hole surface exploration drilling. It is ideally suited for drilling projects where high penetration rate and optimal core recovery are the main goals. The CS4002 has depth capacities for vertical, straight, water-filled boreholes of 8,030 feet with NQ string, 5,250 feet with HQ, and 3,440 feet with PQ.
Let DOSECC Exploration Services put our new CS4002 rig to work for you.
CS-1500 CORING RIG
- Depth Capacity
DLS Wireline: 800 Meters (2690 Feet)
HMQ Wireline: 1200 Meters (3940 Feet) with PQ string - Chuck Assembly
Type: Hydraulic Open, Spring Closed
Maximum Inside Diameter: 117mm (4-5/8 in)
Holding Capacity: 18,181 kg (40,000 lb) - Hoisting Capacity
Main:
Single Line Bare Drum: 7955 kg (17,500 lb)
Double Line Bare Drum: 15,900 kg (35,000 lb)
Cable Size: 33.6 mm (110 ft) by 19 mm (3/4 in) diameter
Wireline:
Single Line Bare Drum: 1136 kg (2,500 lb)
Single Line Full Drum: 382 kg(840 lb)
Line Speed Full Drum: 984 m/min (1260 ft/min)
Cable Length: 975 m (4000 ft) by 6.3 mm (1/4 in) - Standard Equipment
Steel Dump Mast with One Steel Derrick Sections
0.6 m (2 ft) Leveling Hydraulic Supports
Foot Clamp: 139.7 mm (5.5 in) - Power Unit
Cummins 175 Hp diesel engine
Engine Type: 6-cylinder turbo-charge diesel - Feed System
Stroke: 3.5 m (11.5 Feet)
Thrust: 6800 kg (15,000 lb)
Pull: 13,600 kg (30,000 lb) - Mud Pump
FMC W1122 (hydraulic)
Max. Flow: 272 lpm (72 gpm) DOSECC Exploration Services, LLC
Max. Pressure: 7 Mpa (1000 psi)
CS-500 CORING RIG
- Drilling Rig Weight
2267 kg (5000 lb) - Depth Capacity
DLS Wireline: 200 Meters (670 Feet)
HMQ Wireline: 300 Meters (985 Feet) with PQ string - Chuck Assembly
Type: Hydraulic Open, Spring Closed
Maximum Inside Diameter: 117mm (4-5/8 in)
Holding Capacity: 18,181 kg (40,000 lb) - Hoisting Capacity
Main:
Single Line Bare Drum: 2727 kg (6000 lb)
Max. Line Speed: 38 m/min (126 ft/min)
Double Line Bare Drum: 15,900 kg (35,000 lb)
Cable Size: 33 mm (1/2 in) diameter
Wireline:
Single Line Bare Drum: 1550 kg (3400 lb)
Single Line Full Drum: 540 kg(1200 lb)
Max. Line Speed Bare Drum: 80 m/min (260 ft/min)
Max. Line Speed: 244 m/min (800 ft/min)
Cable Size: 5 mm (3/16 in) - Standard Equipment
Steel Dump Derrick with Two Aluminum Mast Sections
1.22 m (4 ft) Leveling Hydraulic Supports
Foot Clamp: 139.7 mm (5.5 in) - Power Unit
2 Lombardini 1204/T
Engine Type: 4-cylinder turbo-charge diesel
31.2 kW (42 Hp) @ 3600 rpm each - Feed System
Stroke: 1.8 m (6 Feet)
Thrust: 3200 kg (7000 lb)
Pull: 4500 kg (10,000 lb) - Mud Pump
FMC Triplex Bean Pump
Driven by One Isuzu LB1 Diesel Engine
20.6 kW (27.6 Hp) @ 3450 rpm
Max. Flow: 200 lpm (53 gpm)
Max. Pressure: 7 Mpa (1000 psi)