Land-Based Drilling Systems

CS14
CS14 rig in Nevada

CS-14 CORING RIG

  • Depth capacity
    1200 meters (4040 Feet) with NQ string
    800 Meters (2690 Feet) with HQ string
    475 Meters (1550 Feet) with PQ string
  • Chuck Assembly
    Type: Self-centering five-jaw
    Maximum Inside Diameter: 117mm (4 ? in)
  • Hoisting Capacity
    Main: 80 kN (18,000lb)
  • Standard Equipment
    1.22 m (4 ft) Leveling Hydraulic Supports
    Foot Clamp:139.7mm (5.5 in)
    Trido 140 water pump
  • Power Unit
    Stage II Cummins diesel engine
  • Feed System
    Stroke: 3.5 m (11.5 Feet)

 

 

 

 

 

 

 

 

 

 


 

cs4002
CS4002 in Nevada

    CS-4002 CORING RIG

    • Depth Capacity Coring
      NQ Wireline: 2,450 m (8,030 ft)
      HQ Wireline: 1,600 m (5,250 ft)
      PQ Wireline: 1,050 m (3,440 ft)
      Mast and Feed System
    • Feed Travel: 3.35 m (11 ft)
      Feed Speeds: Fast and slow with variable control
      Pull Back: 200 kN (45,000 lbf)
      Thrust: 89 kN (20,000 lbf)
      Rod Pull Length: 6.1 m (20 ft) or 9.1 m (30 ft)
      Drilling Angle: 45 To 90 Degrees
      Mast Dump: 2 m (80 in)
    • Power Unit
      Mfg.: Cummins Qsc Pu 8.3 Liter 6 Cylinder
      Power: 212 Kw (285 Hp) @ 2,100 rpm
      Type: Diesel Turbo Charged/Charge Air Cooled
      Cooling: Water
    • Hydraulic Pumps
      Primary Pump: Rotation, Hoist, W/L Hoist, Fast Feed
      Auxiliary Pump: Slow Feed, Chuck, Foot Clamp, Mud Mixer
      Chuck Assembly
    • Maximum Inside Diameter: 117 mm (4 5/8 in)
      Holding Capacity: 178 kN (40,000 lbf)
      Operation: Spring Applied, Hydraulically Opened
    • Drillhead
      Maximum Rpm: 1,300
      Maximum Torque: 6,230 nM (4,596 ft lbf)
      Transmission: Four Speed, Manual Shift
      Mounting: Hydraulic Powered Slide Away
      Lubrication: Pressure System
    • Main Host
      Single Line Capacity: 178 kN (40,000 lbf)
      Line Speed: 36 – 71 m/min (117 - 232 fpm)
      Cable Diameter: 22 mm (7/8 in)
    • Wire Line Hoist Capacity
      2,600 m (8,530 ft) of 6.35 m (1/4 in) cable
      4,600 m (15,090 ft) of 4.76 mm (3/16 in) cable
      Line Speed: Bare 1.38 m/s (272 fpm) full 5.1 m/s (1004 fpm)
      Line Pull: Bare 28.5 kN (6,380 lbf) full 5.1 kN (1,151 lbf)
    • Standard Equipment
      Four Hydraulic Jacks 610 mm (24 in) stroke
      Hydraulic P-Size Holding Clamp
      Control Panel Hydraulic Slide
      High Altitude Kit
      Hydraulic Mud Mixer
      Fuel Tank 950 l (250 gal)
      Mud Pump: Hydraulic Driven FMC W1122bcd
      Max Flow: 140 lpm (37 gpm)
      Max Pressure: 7.0 mpa (1,000 psi)
    • Weight
      Rig Weight: 13,380 Kg (29,500 lbs)
      Truck GVW: 36,287 Kg (80,000 lbs)
      Total Weight: 49,667 Kg (109,500 lbs)

     


     

    cs1500
    CS1500 rig in Utah

    CS-1500 CORING RIG

    • Depth Capacity
      PQ Wireline: 800 Meters (2690 Feet)
      HQ Wireline: 1200 Meters (3940 Feet)
    • Chuck Assembly
      Type: Hydraulic Open, Spring Closed
      Maximum Inside Diameter: 117mm (4-5/8 in)
      Holding Capacity: 18,181 kg (40,000 lb)
    • Hoisting Capacity
      Main:
      Single Line Bare Drum: 7955 kg (17,500 lb)
      Double Line Bare Drum: 15,900 kg (35,000 lb)
      Cable Size: 33.6 mm (110 ft) by 19 mm (3/4 in) diameter
      Wireline:
      Single Line Bare Drum: 1136 kg (2,500 lb)
      Single Line Full Drum: 382 kg(840 lb)
      Line Speed Full Drum: 984 m/min (1260 ft/min)
      Cable Length: 975 m (4000 ft) by 6.3 mm (1/4 in)
    • Standard Equipment
      Steel Dump Mast with One Steel Derrick Sections
      0.6 m (2 ft) Leveling Hydraulic Supports
      Foot Clamp: 139.7 mm (5.5 in)
    • Power Unit
      Cummins 175 Hp diesel engine
      Engine Type: 6-cylinder turbo-charge diesel
    • Feed System
      Stroke: 3.5 m (11.5 Feet)
      Thrust: 6800 kg (15,000 lb)
      Pull: 13,600 kg (30,000 lb)
    • Mud Pump
      FMC W1122 (hydraulic)
      Max. Flow: 272 lpm (72 gpm) DOSECC Exploration Services, LLC
      Max. Pressure: 7 Mpa (1000 psi)

     


    T3WDH DRILLING RIG  

    DSCI1235-cropped
                                     T3WDH mounted on a barge, Lake Van, Turkey

    Depth Capacity
    PQ Wireline: 1828 meters (6,000 feet)
    HQ Wireline: 2743 meters (9,000 feet)
    High Speed Rotary Head
    Type: Four-motor, spur-gear, rotary top drive head;
    8,000 ft-lbs @ 105 rpm; 5500 ft-lbs @ 145 rpm
    High-Speed Coring Head
    ~4,000 ft-lbs @ 350 rpm; ~2,500 ft-lbs @ 175 rpm
    Hoisting Capacity
    Main: 80 kN (18,000 lb)
    Pullback: 184 kN (70,000 lb)
    Wireline: 1360 Kg (3,000 lb)
    Standard Equipment
    Leveling Hydraulic Supports: 2x48” jacks (nondrilling
    end) and 2x36” jacks (drilling end);
    Water injection system: Bean piston water pump,
    0-25 gpm capacity
    Power Unit
    Caterpillar C15 diesel engine
    575 hp @ 1800 rpm
    Feed System
    Twin cylinder, cable feed
    Air Package
    Compressor pressure: 350 psi/24.1 bar
    Compressor flow: 1070 cfm / 505 L/s

    CS500 DRILLING RIG

    • Drilling Rig Weight
    • 2267 kg (5000 lb), modular, man- or helicopter-portable
    • Depth Capacity
      PQ Wireline: 200 Meters (670 Feet)
      HQ Wireline: 300 Meters (985 Feet)
    • Chuck Assembly
      Type: Hydraulic Open, Spring Closed
      Maximum Inside Diameter: 117mm (4-5/8 in)cs500
    • Holding Capacity: 18,181 kg (40,000 lb)
    • Hoisting Capacity
      Main:
      Single Line Bare Drum: 2727 kg (6000 lb)
      Max. Line Speed: 38 m/min (126 ft/min)
      Double Line Bare Drum: 15,900 kg (35,000 lb)
      Cable Size: 33 mm (1/2 in) diameter
      Wireline:
      Single Line Bare Drum: 1550 kg (3400 lb)
      Single Line Full Drum: 540 kg(1200 lb)
      Max. Line Speed Bare Drum: 80 m/min (260 ft/min)
      Max. Line Speed: 244 m/min (800 ft/min)
      Cable Size: 5 mm (3/16 in)
    • Standard Equipment
      Steel Dump Derrick with Two Aluminum Mast Sections
      1.22 m (4 ft) Leveling Hydraulic Supports
      Foot Clamp: 139.7 mm (5.5 in)
    • Power Unit
      2 Lombardini 1204/T
      Engine Type: 4-cylinder turbo-charge diesel
      31.2 kW (42 Hp) @ 3600 rpm each
    • Feed System
      Stroke: 1.8 m (6 Feet)
      Thrust: 3200 kg (7000 lb)
      Pull: 4500 kg (10,000 lb)
    • Mud Pump
      FMC Triplex Bean Pump
      Driven by One Isuzu LB1 Diesel Engine
      20.6 kW (27.6 Hp) @ 3450 rpm
      Max. Flow: 200 lpm (53 gpm)
      Max. Pressure: 7 Mpa (1000 psi)
       

      Temperature While Coring

      Latest innovation improves the cost-benefit of geothermal exploration.


      Barge for Rent

      Click here for details


      DOSECC Exploration Services
      P.O. Box 58857
      Salt Lake City, UT 84158-0857
      Tel: +1 (801) 583-2150